re2_opcodes [Classic RE Modification]

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
^  Instruction Name  ^  Length  ^  Example / Info  ^  History  ^
|{00}  Nop  |  01  |++00++|\\						
	typedef struct { 		
		UCHAR Opcode;		// 0x00
	} Nop;						
This bytecode is used for alignment of 1-byte opcodes and ending ElseIf blocks.++|  08-02-2024 Newly Added  |
|{01}  Evt_end  |  02  |++01 00++|\\						
	typedef struct { 		
		UCHAR Opcode;		// 0x01
		UCHAR zAlign;		// Always Zero (Alignment byte)
	} Evt_end;						
This bytecode ends the current Main/Sub script.++|  08-02-2024 Newly Added  |
|{02}  Evt_next  |  01  |++02++|\\						
	typedef struct { 		
		UCHAR Opcode;		// 0x02
	} Evt_next;						
This bytecode moves to the next event in the sequence.++|  08-02-2024 Newly Added  |
|{03}  Evt_chain  |  02  |++03 ID++|\\						
	typedef struct { 		
		UCHAR Opcode;		// 0x03
		UCHAR NextEventId;	// Event ID to chain to
	} Evt_chain;						
This bytecode chains the current event to the specified next event ID, allowing the script to continue execution from the linked event.++|  08-02-2024 Newly Added  |
|{04}  Evt_exec  |  04  |++04 ?? ?? ID++|\\						
	typedef struct { 		
		UCHAR Opcode;		// 0x04
		UCHAR data1;		// Typically FF
		UCHAR GoSub;		// Opcode for GoSub 0x18
		UCHAR ScdId;		// Sub Script ID to Jump to
	} Evt_exec;						
This bytecode executes the specified event with given parameters.++|  08-02-2024 Newly Added  |
|{05}  Evt_kill  |  02  |++05 ID++|\\						
	typedef struct { 		
		UCHAR Opcode;		// 0x05
		UCHAR EventId;		// Event ID to terminate
	} Evt_kill;						
This bytecode terminates the specified event.++|  08-02-2024 Newly Added  |
|{06}  Ifel_ck  |  04  |++06 00 SI ZE++|\\						
	typedef struct { 		
		UCHAR Opcode;		// 0x06
		UCHAR zAlign;		// Always Zero (Alignment byte)
		USHORT Size;		// Size of the block to check
	} Ifel_ck;						
This bytecode checks a condition and branches accordingly.++|  08-02-2024 Newly Added  |
|{07}  Else_ck  |  04  |++07 00 SI ZE++|\\						
	typedef struct { 		
		UCHAR Opcode;		// 0x07
		UCHAR zAlign;		// Always Zero (Alignment byte)
		USHORT Size;		// Size of the block to check
	} Else_ck;						
This bytecode specifies the size of the block to check if the corresponding Ifel_ck condition is met.++|  08-02-2024 Newly Added  |
|{08}  Endif  |  02  |++08 00++|\\						
	typedef struct { 		
		UCHAR Opcode;		// 0x08
		UCHAR zAlign;		// Always Zero (Alignment byte)
	} Endif;						
This bytecode marks the end of an If/ElseIf/Else block.++|  08-02-2024 Newly Added  |
|{09}  Sleep  |  04  |++09 ?? CO NT++|\\						
	typedef struct { 		
		UCHAR Opcode;		// 0x09
		UCHAR Sleeping;		// Opcode for Sleeping 0x0A
		USHORT Count;		// Timer / Sleep Duration
	} Sleep;						
This bytecode pauses script execution for the specified duration.++|  08-02-2024 Newly Added  |
|{0A}  Sleeping  |  03  |++0A CO NT++|\\						
	typedef struct { 		
		UCHAR Opcode;		// 0x0A
		USHORT Count;		// Timer / Sleep Duration
	} Sleeping;						
This bytecode pauses script execution for the specified duration.++|  08-02-2024 Newly Added  |
|{0B}  Wsleep  |  01  |++0B++|\\						
	typedef struct { 		
		UCHAR Opcode;		// 0x0B
	} Wsleep;						
This bytecode used before 0C will wait until the current XA sound has finished playing before proceeding.++|  08-02-2024 Newly Added  |
|{0C}  Wsleeping  |  01  |++0C++|\\						
	typedef struct { 		
		UCHAR Opcode;		// 0x0C
	} Wsleeping;						
This bytecode used after 0B will wait until the current XA sound has finished playing before proceeding.++|  08-02-2024 Newly Added  |
|{0D}  For  |  06  |++0D 00 SI ZE CO NT++|\\						
	typedef struct { 		
		UCHAR Opcode;		// 0x0D
		UCHAR zAlign;		// Always Zero (Alignment byte)
		USHORT Size;		// Size of the block to check
		USHORT Count;		// Amount of times block is looped
	} For;						
This bytecode begins a for-loop with the specified start and end values.++|  08-02-2024 Newly Added  |
|{0E}  Next  |  02  |++0E 00++|\\						
	typedef struct { 		
		UCHAR Opcode;		// 0x0E
		UCHAR zAlign;		// Always Zero (Alignment byte)
	} Next;						
This bytecode marks the end of a for-loop.++|  08-02-2024 Newly Added  |
|{0F}  While  |  04  |++0F 00 SI ZE++|\\						
	typedef struct { 		
		UCHAR Opcode;		// 0x0F
		UCHAR zAlign;		// Always Zero (Alignment byte)
		USHORT Size;		// Size of the block to check
	} While;						
This bytecode begins a while-loop that continues as long as the specified condition is true.++|  08-02-2024 Newly Added  |
|{10}  Ewhile  |  02  |++10 ID++|\\						
	typedef struct { 		
		UCHAR Opcode;		// 0x10
		UCHAR LoopId;		// ID of the while-loop to end
	} Ewhile;						
This bytecode ends the specified while-loop.++|  08-02-2024 Newly Added  |
|{11}  Do  |  04  |++11 00 SI ZE++|\\						
	typedef struct { 		
		UCHAR Opcode;		// 0x11
		UCHAR zAlign;		// Always Zero (Alignment byte)
		USHORT Size;		// Size of the block to check
	} Do;						
This bytecode begins a do-while loop that executes the loop body once before checking the condition.++|  08-02-2024 Newly Added  |
|{12}  Edwhile  |  02  |++12 ID++|\\						
	typedef struct { 		
		UCHAR Opcode;		// 0x12
		UCHAR LoopId;		// ID of the do-while loop to end
	} Edwhile;						
This bytecode ends the specified do-while loop.++|  08-02-2024 Newly Added  |
|{13}  Switch  |  04  |++13 ID SI ZE++|\\						
	typedef struct { 		
		UCHAR Opcode;		// 0x13
		UCHAR SwitchId;		// ID of the switch variable
		USHORT Size;		// Size of the block to check
	} Switch;						
This bytecode begins a switch-case block with the specified switch variable and default size.++|  08-02-2024 Newly Added  |
|{14}  Case  |  06  |++14 00 SI ZE VA LU++|\\						
	typedef struct { 		
		UCHAR Opcode;		// 0x14
		UCHAR zAlign;		// Always Zero (Alignment byte)
		USHORT Size;		// Size of the block to check
		USHORT CaseValue;	// Value to compare with the switch variable
	} Case;						
This bytecode defines a case within a switch-case block.++|  08-02-2024 Newly Added  |
|{15}  Default  |  02  |++15 00++|\\						
	typedef struct { 		
		UCHAR Opcode;		// 0x15
		UCHAR zAlign;		// Always Zero (Alignment byte)
	} Default;						
This bytecode marks the default case in a switch-case block.++|  08-02-2024 Newly Added  |
|{16}  Eswitch  |  02  |++16 00++|\\						
	typedef struct { 		
		UCHAR Opcode;		// 0x16
		UCHAR zAlign;		// Always Zero (Alignment byte)
	} Eswitch;						
This bytecode ends the switch-case block.++|  08-02-2024 Newly Added  |
|{17}  Goto  |  06  |++17 ?? ?? ?? ?? ?? ??++|\\
	typedef struct { 		
		UCHAR Opcode;       	// 0x17
		UCHAR Ifel_ctr;     	// Always 0xFF (or 0x01 on specific cases)
		UCHAR Loop_ctr;    	// Always 0xFF (or 0x00 on specific cases)
		UCHAR zAlign;      	// Always 0x00
		SHORT Offset;      	// Relative Pointer, always references the same script
	} Goto;			
This bytecode jumps to the specified offset within the script.++|  08-02-2024 Newly Added  |
|{18}  Gosub  |  02  |++18 ID++|\\						
	typedef struct { 		
		UCHAR Opcode;		// 0x18
		UCHAR SubroutineId;	// ID of the subroutine to call
	} Gosub;						
This bytecode calls the specified subroutine.++|  08-02-2024 Newly Added  |
|{19}  Return  |  02  |++19 00++|\\						
	typedef struct { 		
		UCHAR Opcode;		// 0x19
		UCHAR zAlign;		// Always Zero (Alignment byte)
	} Return;						
This bytecode returns from the specified subroutine.++|  08-02-2024 Newly Added  |
|{1A}  Break  |  02  |++1A 00++|\\						
	typedef struct { 		
		UCHAR Opcode;		// 0x1A
		UCHAR zAlign;		// Always Zero (Alignment byte)
	} Break;						
This bytecode breaks out of the specified loop.++|  08-02-2024 Newly Added  |
|{1B}  For2  |  06  |++1B 00 XX XX 00 XX XX++|\\						
	typedef struct { 		
		UCHAR Opcode;		// 0x1B
		UCHAR zAlign;		// Always Zero (Alignment byte)
		SHORT StartValue;	// Start value of the loop counter
		UCHAR zAlign2;		// Always Zero (Alignment byte)
		SHORT EndValue;		// End value of the loop counter
	} For2;						
This bytecode begins a for-loop with the specified start and end values.++|  08-02-2024 Newly Added  |
|{1C}  Break_point  |  01  |++1C++|\\						
	typedef struct { 		
		UCHAR Opcode;		// 0x1C
	} Break_point;						
This bytecode sets a breakpoint for debugging purposes.++|  08-02-2024 Newly Added  |
|{1D}  Work_copy  |  04  |++1D ?? ID ??++|\\						
	typedef struct { 		
		UCHAR Opcode;		// 0x1D
		UCHAR Source;		// Source index
		UCHAR DestinationId;	// Destination index
		UCHAR Typecast;		// Typecast operation
	} Work_copy;						
This bytecode copies a value from the source index to the destination index with an optional typecast.++|  08-02-2024 Newly Added  |
|{1E}  Nop  |  01  |++1E++|\\						
	typedef struct { 		
		UCHAR Opcode;		// 0x1E
	} Nop;						
This bytecode is used for alignment of 1-byte opcodes and ending ElseIf blocks.++|  08-02-2024 Newly Added  |
|{1F}  Nop  |  01  |++1F++|\\						
	typedef struct { 		
		UCHAR Opcode;		// 0x1F
	} Nop;						
This bytecode is used for alignment of 1-byte opcodes and ending ElseIf blocks.++|  08-02-2024 Newly Added  |
|{20}  Nop  |  01  |++20++|\\						
	typedef struct { 		
		UCHAR Opcode;		// 0x20
	} Nop;						
This bytecode is used for alignment of 1-byte opcodes and ending ElseIf blocks.++|  08-02-2024 Newly Added  |
|{21}  Ck  |  04  |++21 ?? ID ??++|\\						
	typedef struct { 		
		UCHAR Opcode;		// 0x21
		UCHAR Flag;		// System flag to check
		UCHAR Id;		// Bit ID to check
		UCHAR OnOff;		// On/Off state to check
	} Ck;						
This bytecode checks the specified system flag and bit ID for the given On/Off state.++|  08-02-2024 Newly Added  |
|{22}  Set  |  04  |++22 ?? ID ??++|\\						
	typedef struct { 		
		UCHAR Opcode;		// 0x22
		UCHAR Flag;		// System flag to set
		UCHAR Id;		// Bit ID to set
		UCHAR OnOff;		// On/Off state to set
	} Set;						
This bytecode sets the specified system flag and bit ID to the given On/Off state.++|  08-02-2024 Newly Added  |
|{23}  Cmp  |  06  |++23 00 ID ?? VA LU++|\\
	typedef struct { 		
		UCHAR Opcode;      	// 0x23
		UCHAR zAlign;      	// Always 0x00
		UCHAR MemberId;    	// Id of the member to compare
		UCHAR Operator;     	// Type of comparison
		SHORT Value;       	// Value to compare the member to
	} Cmp;					
This bytecode compares the specified system flag with the given value using the provided comparison operator.++|  08-02-2024 Newly Added  |
|{24}  Save  |  04  |++24 ID XX XX++|\\						
	typedef struct { 		
		UCHAR Opcode;		// 0x24
		UCHAR Destination;	// Destination index
		SHORT Source;		// Source value
	} Save;						
This bytecode saves the specified source value to the destination index.++|  08-02-2024 Newly Added  |
|{25}  Copy  |  03  |++25 ID ??++|\\						
	typedef struct { 		
		UCHAR Opcode;		// 0x25
		UCHAR Destination;	// Destination index
		UCHAR Source;		// Source index
	} Copy;						
This bytecode copies the value from the source index to the destination index.++|  08-02-2024 Newly Added  |
|{26}  Calc  |  06  |++26 00 ?? ?? VA LU++|\\						
	typedef struct { 		
		UCHAR Opcode;		// 0x26
		UCHAR zAlign;		// Always Zero (Alignment byte)
		UCHAR Operator;		// Arithmetic operation to perform
		UCHAR Flag;		// Memory Location to apply math to
		SHORT Value;		// Amount used in operation
	} Calc;						
This bytecode performs the specified arithmetic operation on the operands and stores the result.++|  08-02-2024 Newly Added  |
|{27}  Calc2  |  04  |++27 ?? ?? ??++|\\
	typedef struct { 		
		UCHAR Opcode;      	 // 0x27
		UCHAR Operator;   	  // Type of operation
		UCHAR Flag;       	  // F_atari, etc
		UCHAR Value;      	  // Value to use in the operation
	} Calc2;					
This bytecode performs the specified arithmetic operation on the two operands and stores the result.++|  08-02-2024 Newly Added  |
|{28}  Sce_rnd  |  01  |++28++|\\						
	typedef struct { 		
		UCHAR Opcode;		// 0x28
	} Sce_rnd;						
This bytecode generates a random value.++|  08-02-2024 Newly Added  |					
|{29}  Cut_chg  |  02  |++29 ID++|\\						
	typedef struct { 		
		UCHAR Opcode;		// 0x29
		UCHAR CutId;		// ID of the cutscene
	} Cut_chg;						
This bytecode changes the current camera to the specified camera ID.++|  08-02-2024 Newly Added  |
|{2A}  Cut_old  |  01  |++2A++|\\						
	typedef struct { 		
		UCHAR Opcode;		// 0x2A
	} Cut_old;						
This bytecode reverts to the previous camera.++|  08-02-2024 Newly Added  |
|{2B}  Message_on  |  06  |++2B 00 ?? ?? SI ZE++|\\						
	typedef struct { 		
		UCHAR Opcode;		// 0x2B
		UCHAR zAlign;		// Always Zero (Alignment byte)
		UCHAR Type;		// Message type
		UCHAR MessageId;	// ID of the message to display
		USHORT DisplayTime;	// Time to display the message
	} Message_on;						
This bytecode displays the specified message.++|  08-02-2024 Newly Added  |
|{2C}  Aot_set  |  20  |++2C ID ?? ?? ?? ?? XX XX ZZ ZZ SI ZE SI ZE ?? ?? ?? ?? ?? ??++|\\						
	typedef struct { 		
		UCHAR Opcode;		// 0x2C
		CHAR Aot;		// Aot
		UCHAR SCE;		// Id
		UCHAR SAT;		// Type
		UCHAR nFloor;		// nFloor
		UCHAR Super;		// Super
		SHORT X;		// Position
		SHORT Z;		// Position
		USHORT W;		// Size
		USHORT D;		// Size
		USHORT Data0;		// Sce_Message / Flag Type / Always 0x00FF
		USHORT Data1;		// Sce_Message / Flag Id / Script Id Init & Complete
		USHORT Data2;		// Always 0xFFFF
	} Aot_set;
This bytecode sets the properties of the specified AOT.++|  08-02-2024 Newly Added  |
|{2D}  Obj_model_set  |  38  |++2D ?? ID ?? ?? ?? ?? ?? ?? TI PE BE FL XX XX YY YY ZZ ZZ DX DX DY DY DZ DZ XX XX YY YY ZZ ZZ XX XX YY YY ZZ ZZ++|\\						
	typedef struct { 		
		UCHAR Opcode;		// 0x2D
		UCHAR MD1;		// MD1 File Id
		UCHAR Id;		// Global->Ob_model[].Id
		UCHAR Ccol_old;		// CC_WORK structure
		UCHAR Ccol_no;		// CC_WORK structure
		UCHAR Ctex_old;		// CC_WORK structure
		UCHAR nFloor;		// 
		UCHAR Super;		// 
		USHORT Type;		// Global->Ob_model[].Type
		USHORT BeFlag;		// Global->Ob_model[].Be_flg
		SHORT Attribute;	// Global->Ob_model[].Attribute
		SHORT X;		// 
		SHORT Y;		// 
		SHORT Z;		// 
		SHORT DirX;		// 
		SHORT DirY;		// 
		SHORT DirZ;		// 
		SHORT AtariOffsetX;	// 
		SHORT AtariOffsetY;	// 
		SHORT AtariOffsetZ;	// 
		SHORT AtariSizeX;	// 
		SHORT AtariSizeY;	// 
		SHORT AtariSizeZ;	// 
	} Obj_model_set;					
This bytecode sets the properties of the specified object model.++|  08-02-2024 Newly Added  |
|{2E}  Work_set  |  03  |++2E ?? ID++|\\						
	typedef struct { 		
		UCHAR Opcode;		// 0x2E
		UCHAR Type;		// Type of Work Set to Select
		UCHAR EntityId;		// ID of Entity to select
	} Work_set;						
This bytecode sets the properties of the specified work (task).++|  08-02-2024 Newly Added  |
|{2F}  Speed_set  |  04  |++2F ID ?? 00++|\\						
	typedef struct { 		
		UCHAR Opcode;		// 0x2F
		UCHAR SpeedId;		// ID of the speed setting
		USHORT SpeedValue;	// Value of the speed setting
	} Speed_set;						
This bytecode sets the specified speed setting.++|  08-02-2024 Newly Added  |
|{30}  Add_speed  |  01  |++30++|\\						
	typedef struct { 		
		UCHAR Opcode;		// 0x30
	} Add_speed;						
This bytecode increments the speed setting.++|  08-02-2024 Newly Added  |
|{31}  Add_aspeed  |  01  |++31++|\\						
	typedef struct { 		
		UCHAR Opcode;		// 0x31
	} Add_aspeed;						
This bytecode increments the angular speed setting.++|  08-02-2024 Newly Added  |
|{32}  Pos_set  |  08  |++32 00 XX XX YY YY ZZ ZZ++|\\						
	typedef struct { 		
		UCHAR Opcode;		// 0x32
		UCHAR zAlign;		// Always Zero (Alignment byte)
		SHORT PosX;		// X position
		SHORT PosY;		// Y position
		SHORT PosZ;		// Z position
	} Pos_set;						
This bytecode sets the position in 3D space.++|  08-02-2024 Newly Added  |
|{33}  Dir_set  |  08  |++33 00 DX DX DY DY DZ DZ++|\\						
	typedef struct { 		
		UCHAR Opcode;		// 0x33
		UCHAR zAlign;		// Always Zero (Alignment byte)
		SHORT DirX;		// X direction
		SHORT DirY;		// Y direction
		SHORT DirZ;		// Z direction
	} Dir_set;						
This bytecode sets the direction in 3D space.++|  08-02-2024 Newly Added  |
|{34}  Member_set  |  04  |++34 ?? ?? ??++|\\						
	typedef struct { 		
		UCHAR Opcode;		// 0x34
		UCHAR Destination;	// Destination
		SHORT Source;		// Source
	} Member_set;				
This bytecode sets the properties of the specified member.++|  08-02-2024 Newly Added  |
|{35}  Member_set2  |  03  |++35 ?? ?? ??++|\\						
	typedef struct { 		
		UCHAR Opcode;		// 0x35
		UCHAR Destination;	// Destination
		UCHAR Source;		// Source
	} Member_set2;					
This bytecode sets a single property of the specified member.++|  08-02-2024 Newly Added  |
|{36}  Se_on  |  12  |++36 ?? ?? ?? ?? XX XX YY YY ZZ ZZ++|\\						
	typedef struct { 		
		UCHAR Opcode;		// 0x36
		UCHAR VAB;		// VAB Bank Id
		SHORT EDT;		// EDT Sample Id
		SHORT data0;		// Sound Reverberation, Work Aot/Obj No
		SHORT X;		// Position
		SHORT Y;
		SHORT Z;
	} Se_on;					
This bytecode plays the specified sound effect with the given parameters.++|  08-02-2024 Newly Added  |
|{37}  Sca_id_set  |  04  |++37 ?? ?? ??++|\\						
	typedef struct { 		
		UCHAR Opcode;		// 0x37
		UCHAR iEntry;		// SCA Collision Entry
		USHORT Id;		// New Collision ID
	} Sca_id_set;				
This bytecode sets the specified scale ID to the given value.++|  08-02-2024 Newly Added  |
|{38}  Flr_set  |  03  |++38 ID ??++|\\						
	typedef struct { 		
		UCHAR Opcode;		// 0x38
		UCHAR Id;
		UCHAR Flag;
	} Flr_set;					
This bytecode sets the specified floor ID to the given value.++|  08-02-2024 Newly Added  |
|{39}  Dir_ck  |  08  |++39 00 XX XX ZZ ZZ ?? ??++|\\						
	typedef struct { 		
		UCHAR Opcode;		// 0x39
		UCHAR zAlign;		// 0x00
		SHORT X;
		SHORT Z;
		SHORT Add;
	} Dir_ck;					
This bytecode checks the specified direction coordinates.++|  08-02-2024 Newly Added  |
|{3A}  Sce_espr_on  |  16  |++3A 00 ?? ?? ?? ?? ?? ?? XX XX YY YY ZZ ZZ DY DY++|\\						
	typedef struct { 		
		UCHAR Opcode;		// 0x3A
		UCHAR zAlign;		// 0x00
		USHORT data0;
		USHORT data1;
		USHORT data2;
		SHORT X;
		SHORT Y;
		SHORT Z;
		SHORT DirY;
	} Sce_espr_on;					
This bytecode turns on the specified espr with the given parameters.++|  08-02-2024 Newly Added  |
|{3B}  Door_aot_set  |  32  |++3B ID ?? ?? ?? ?? ?? XX XX ZZ ZZ SI ZE SI ZE XX XX YY YY ZZ ZZ 00 ?? ?? ?? ?? ++|\\						
	typedef struct { 		
		UCHAR Opcode;		// 0x3B
		UCHAR Aot;		// Aot
		UCHAR SCE;		// Id		/* tagSCE_AOT
		UCHAR SAT;		// Type
		UCHAR nFloor;		// nFloor
		UCHAR Super;		// Super
		SHORT X;		// Position
		SHORT Z;		// Position
		USHORT W;		// Size
		USHORT D;		// Size		*/ tagSCE_AOT
		SHORT Next_pos_x;	//		*/ tagIN_DOOR_WORK
		SHORT Next_pos_y;	//
		SHORT Next_pos_z;	//
		SHORT Next_cdir_y;	//
		UCHAR Next_stage;	//
		UCHAR Next_room;	//
		UCHAR Next_cut;		//
		UCHAR Next_nfloor;	//
		UCHAR Dtex_type;	// DO2 File Id
		UCHAR Door_type;	// DO2 Animation Set
		UCHAR Knock_type;	// Sound
		UCHAR Key_id;		// 
		UCHAR Key_type;		// 
		UCHAR Free;		// 		*/ tagIN_DOOR_WORK
	} Door_aot_set;
This bytecode sets the specified door AOT parameters.++|  08-02-2024 Newly Added  |
|{3C}  Cut_auto  |  02  |++3C ?? ++|\\						
	typedef struct { 		
		UCHAR Opcode;		// 0x3C
		UCHAR OnOff;		// 00	OFF, 01	ON
	} Cut_auto;				
This bytecode sets the specified auto cutscene parameters.++|  08-02-2024 Newly Added  |
|{3D}  Member_copy  |  03  |++3D ?? ?? ++|\\						
	typedef struct { 		
		UCHAR Opcode;		// 0x3D
		UCHAR Destination;	// Destination
		UCHAR Source;		// Source
	} Member_copy;				
This bytecode copies the specified member parameters from the source to the destination.++|  08-02-2024 Newly Added  |
|{3E}  Member_cmp  |  06  |++3E 00 ?? ?? VA LU++|\\						
	typedef struct { 		
		UCHAR Opcode;		// 0x3E
		UCHAR zAlign;		// Always Zero (Alignment byte)
		UCHAR Flag;		// Load_member_addr_branch() argv[1]
		UCHAR Operator;		// Comparison operator
		SHORT Value;		// Value to compare
	} Member_cmp;						
This bytecode compares the specified member parameters with the given value.++|  08-02-2024 Newly Added  |
|{3F}  Plc_motion  |  04  |++3F ID ?? ??++|\\						
	typedef struct { 		
		UCHAR Opcode;		// 0x3F
		UCHAR MotionId;		// EDD/EMR Id
		UCHAR Mode;		// Mode to set the motion to
		UCHAR Param;		// Parameter for the motion
	} Plc_motion;						
This bytecode sets the specified motion parameters.++|  08-02-2024 Newly Added  |
|{40}  Plc_dest  |  08  |++40 00 ?? ?? XX XX ZZ ZZ++|\\						
	typedef struct { 		
		UCHAR Opcode;		// 0x40
		UCHAR zAlign;		// 0x00
		UCHAR Animation;	// EDD/EMR Id
		UCHAR Bit;		// Room_flg
		SHORT X;		// Destination
		SHORT Z;		// Destination
	} Plc_dest;					
This bytecode sets the specified destination parameters.++|  08-02-2024 Newly Added  |
|{41}  Plc_neck  |  10  |++41 ?? XX XX YY YY ZZ ZZ ?? ?? ++|\\						
	typedef struct { 		
		UCHAR Opcode;		// 0x41
		UCHAR Op;		//
		SHORT X;		//
		SHORT Y;		//
		SHORT Z;		//
		UCHAR SpeedX;		//
		UCHAR SpeedZ;		//
	} Plc_neck;					
This bytecode sets the specified neck parameters.++|  08-02-2024 Newly Added  |
|{42}  Plc_ret  |  01  |++42++|\\						
	typedef struct { 		
		UCHAR Opcode;		// 0x42
	} Plc_ret;	
This bytecode returns from the specified plc function.++|  08-02-2024 Newly Added  |
|{43}  Plc_flg  |  04  |++43 00 ?? ??++|\\						
	typedef struct { 		
		UCHAR Opcode;		// 0x43
		UCHAR zAlign;		// 0x00
		UCHAR data0;		// 
		UCHAR data1;		// 
	} Plc_flg;
This bytecode sets the specified flag parameters.++|  08-02-2024 Newly Added  |
|{44}  Sce_em_set  |  22  |++44 00 ?? ID ?? ?? ?? ?? ?? XX XX YY YY ZZ ZZ DY DY ?? ?? ++|\\						
	typedef struct { 		
		UCHAR Opcode;		// 0x44
		UCHAR Nop;		// 0x00
		CHAR Em_no;		// Em_no
		UCHAR Id;		// EMD File Id for Em_bin_load() function
		USHORT Type;		// Type
		UCHAR nFloor;		// nFloor
		UCHAR Sound_flg;	// Sound_flg
		UCHAR Model_type;	// Model_type
		UCHAR Em_set_flg;	// Em_set_flg
		SHORT Pos_x;		// Position X
		SHORT Pos_y;		// Position Y
		SHORT Pos_z;		// Position Z
		SHORT Cdir_y;		// Rotation Y
		SHORT Motion;		// Motion
		SHORT Ctr_flg;		// Ctr_flg
	} Sce_em_set;					
This bytecode sets the specified enemy parameters.++|  08-02-2024 Newly Added  |
|{45}  Col_chg_set  |  05  |++45 ?? ?? ?? ??++|\\
	typedef struct { 		
		UCHAR Opcode;		// 0x45
		UCHAR Data0;		// Data0
		UCHAR Data1;		// Data1
		UCHAR Data2;		// Data2
		UCHAR Data3;		// Data3
	} Col_chg_set;				
This bytecode sets the specified color parameters.++|  08-02-2024 Newly Added  |
|{46}  Aot_reset  |  10  |++46 ID ?? ?? ?? XX XX XX XX ++|\\
	typedef struct { 		
		UCHAR Opcode;		// 0x46
		CHAR Aot;		// Aot
		UCHAR SCE;		// SCE
		UCHAR SAT;		// SAT
		SHORT Data0;		// Data0
		SHORT Data1;		// Data1
		SHORT Data2;		// Data2
	} Aot_reset;					
This bytecode resets the specified AOT parameters.++|  08-02-2024 Newly Added  |
|{47}  Aot_on  |  02  |++47 ID++|\\
	typedef struct { 		
		UCHAR Opcode;		// 0x47
		CHAR Aot;		// Aot
	} Aot_on;					
This bytecode turns on the specified AOT.++|  08-02-2024 Newly Added  |
|{48}  Super_set  |  16  |++48 00 ?? ID XX XX YY YY ZZ ZZ DX DX DY DY DZ DZ ++|\\
	typedef struct { 		
		UCHAR Opcode;		// 0x48
		UCHAR zAlign;		// Alignment byte (always 0x00)
		UCHAR Work;		// Work Type
		UCHAR Id;		// Work Aot/Obj No
		SHORT pX;		// Parent X
		SHORT pY;		// Parent Y
		SHORT pZ;		// Parent Z
		SHORT dX;		// Destination X
		SHORT dY;		// Destination Y
		SHORT dZ;		// Destination Z
	} Super_set;					
This bytecode sets the specified super parameters.++|  08-02-2024 Newly Added  |
|{49}  Super_reset  |  08  |++49 00 DX DX DY DY DZ DZ ++|\\
	typedef struct { 		
		UCHAR Opcode;		// 0x49
		UCHAR zAlign;		// Alignment byte (always 0x00)
		SHORT dX;		// Destination X
		SHORT dY;		// Destination Y
		SHORT dZ;		// Destination Z
	} Super_reset;				
This bytecode resets the specified super parameters.++|  08-02-2024 Newly Added  |
|{4A}  Plc_gun  |  02  |++4A ID++|\\						
	typedef struct { 		
		UCHAR Opcode;		// 0x4A
		UCHAR GunId;		// ID of the gun to set
	} Plc_gun;						
This bytecode sets the specified gun parameters.++|  08-02-2024 Newly Added  |
|{4B}  Cut_replace  |  03  |++4B ID ??++|\\
	typedef struct { 		
		UCHAR Opcode;		// 0x4B
		UCHAR Id;		// Id
		UCHAR Value;		// Value
	} Cut_replace;				
This bytecode replaces the specified cutscene parameters.++|  08-02-2024 Newly Added  |
|{4C}  Sce_espr_kill  |  05  |++4C ID ?? ?? ??++|\\
	typedef struct { 		
		UCHAR Opcode;		// 0x4C
		UCHAR id;		// Esp_kill() argv[0]
		UCHAR tp;		// Esp_kill() argv[1]
		CHAR WorkKind;		// Get_matrix() argv[0]
		CHAR WorkNo;		// Get_matrix() argv[1]
	} Sce_espr_kill;					
This bytecode kills the specified espr with the given parameters.++|  08-02-2024 Newly Added  |
|{4D}  Door_model_set  |  22  |++4D ?? ID ?? ?? ?? ?? XX XX YY YY ZZ ZZ DY DY ?? ?? ?? ?? ?? ?? ++|\\
	typedef struct { 		
		UCHAR Opcode;		// 0x4D
		UCHAR data0;		// data0
		UCHAR Id;		// DOOR_WORK.Id
		UCHAR OfsY;		// DOOR_WORK.Atd[3]
		UCHAR BeFlg;		// DOOR_WORK.Be_flg
		UCHAR data5;		// data5
		USHORT data6;		// data6
		SHORT X;		// DOOR_WORK.Atd[3]
		SHORT Y;		// DOOR_WORK.Atd[3]
		SHORT Z;		// DOOR_WORK.Atd[3]
		SHORT DirY;		// DOOR_WORK.Atd[3]
		USHORT data10;		// DOOR_WORK.MATRIX
		USHORT data11;		// DOOR_WORK.MATRIX
		USHORT data12;		// DOOR_WORK.MATRIX
	} Door_model_set;					
This bytecode sets the specified door model parameters.++|  08-02-2024 Newly Added  |
|{4E}  Item_aot_set  |  22  |++4E ID ?? ?? ?? ?? ?? XX XX ZZ ZZ SI ZE SI ZE ?? ?? ?? ?? ?? ?? ?? ?? ++|\\
	typedef struct { 		
		UCHAR Opcode;		// 0x4E
		UCHAR Aot;		// Aot
		UCHAR SCE;		// SCE
		UCHAR SAT;		// SAT
		UCHAR nFloor;		// nFloor
		UCHAR Super;		// Super
		SHORT X;		// X
		SHORT Z;		// Z
		USHORT W;		// W
		USHORT D;		// D
		USHORT iItem;		// iItem
		USHORT nItem;		// nItem
		USHORT Flag;		// Flag
		UCHAR MD1;		// MD1
		UCHAR Action;		// Action
	} Item_aot_set;					
This bytecode sets the specified item AOT parameters.++|  08-02-2024 Newly Added  |
|{4F}  Sce_key_ck  |  04  |++4F ?? VA LU ++|\\
	typedef struct { 		
		UCHAR Opcode;		// 0x4F
		UCHAR Flag;		// Flag
		USHORT Value;		// Value
	} Sce_key_ck;				
This bytecode checks the specified key parameters.++|  08-02-2024 Newly Added  |
|{50}  Sce_trg_ck  |  04  |++50 ?? VA LU ++|\\
	typedef struct { 		
		UCHAR Opcode;		// 0x50
		UCHAR Flag;		// Flag
		USHORT Value;		// Value
	} Sce_trg_ck;				
This bytecode checks the specified trigger parameters.++|  08-02-2024 Newly Added  |
|{51}  Sce_bgm_control  |  06  |++51 ID ?? ?? ?? ?? ++|\\
	typedef struct { 		
		UCHAR Opcode;		// 0x51
		UCHAR Id;		// Id
		UCHAR Op;		// Op
		UCHAR Type;		// Type
		UCHAR VolL;		// VolL
		UCHAR VolR;		// VolR
	} Sce_bgm_control;					
This bytecode controls the specified BGM parameters.++|  08-02-2024 Newly Added  |
|{52}  Sce_espr_control  |  06  |++52 ID ?? ?? ?? ?? ++|\\
	typedef struct { 		
		UCHAR Opcode;		// 0x52
		UCHAR Id;		// Id
		UCHAR Type;		// Type
		UCHAR Return;		// Return
		CHAR WorkKind;		// WorkKind
		CHAR WorkNo;		// WorkNo
	} Sce_espr_control;					
This bytecode controls the specified espr parameters.++|  08-02-2024 Newly Added  |
|{53}  Sce_fade_set  |  06  |++53 ?? ?? ?? ?? ?? ++|\\
	typedef struct { 		
		UCHAR Opcode;		// 0x53
		UCHAR data0;		// data0
		UCHAR data1;		// data1
		UCHAR data2;		// data2
		USHORT data3;		// data3
	} Sce_fade_set;				
This bytecode sets the specified fade parameters.++|  08-02-2024 Newly Added  |
|{54}  Sce_espr3d_on  |  22  |++54 00 ?? ?? ?? ?? XX XX YY YY ZZ ZZ DX DX DY DY DZ DZ ?? ?? ++|\\
	typedef struct { 		
		UCHAR Opcode;		// 0x54
		UCHAR zAlign;		// zAlign
		USHORT data0;		// data0
		USHORT data1;		// data1
		USHORT data2;		// data2
		SHORT X;		// X
		SHORT Y;		// Y
		SHORT Z;		// Z
		SHORT DirX;		// DirX
		SHORT DirY;		// DirY
		SHORT DirZ;		// DirZ
		SHORT data3;		// data3
	} Sce_espr3d_on;					
This bytecode turns on the specified 3D espr with the given parameters.++|  08-02-2024 Newly Added  |
|{55}  Member_calc  |  06  |++55 ?? ?? ?? ?? VA LU ++|\\
	typedef struct { 		
		UCHAR Opcode;		// 0x55
		UCHAR Operator;		// Operator
		USHORT Flag;		// Flag
		SHORT Value;		// Value
	} Member_calc;				
This bytecode performs the specified arithmetic operation on the member with the given value.++|  08-02-2024 Newly Added  |
|{56}  Member_calc2  |  04  |++56 ?? ?? ?? ++|\\
	typedef struct { 		
		UCHAR Opcode;		// 0x56
		UCHAR Operator;		// Operator
		UCHAR Flag;		// Flag
		UCHAR Value;		// Value
	} Member_calc2;				
This bytecode performs the specified arithmetic operation on the member with the given value.++|  08-02-2024 Newly Added  |
|{57}  Sce_bgmtbl_set  |  08  |++57 00 ?? ?? ?? ?? ?? ++|\\
	typedef struct { 		
		UCHAR Opcode;		// 0x57
		UCHAR zAlign;		// zAlign
		UCHAR Stage;		// Stage
		UCHAR Room;		// Room
		USHORT data1;		// data1
		USHORT data2;		// data2
	} Sce_bgmtbl_set;					
This bytecode sets the specified BGM table parameters.++|  08-02-2024 Newly Added  |
|{58}  Plc_rot  |  04  |++58 ID ?? ?? ++|\\
	typedef struct { 		
		UCHAR Opcode;		// 0x58
		UCHAR Id;		// Id
		USHORT Sce_free0;	// Sce_free0
	} Plc_rot;
					
This bytecode sets the specified rotation parameters.++|  08-02-2024 Newly Added  |
|{59}  Xa_on  |  04  |++59 ?? ?? ?? ++|\\
	typedef struct { 		
		UCHAR Opcode;		// 0x59
		UCHAR Mode;		// Mode
		USHORT Number;		// Number
	} Xa_on;		
This bytecode turns on the specified XA with the given parameters.++|  08-02-2024 Newly Added  |
|{5A}  Weapon_chg  |  02  |++5A ID++|\\						
	typedef struct { 		
		UCHAR Opcode;		// 0x5A
		UCHAR WeaponId;		// ID of the weapon to change
	} Weapon_chg;						
This bytecode changes the specified weapon parameters.++|  08-02-2024 Newly Added  |
|{5B}  Plc_cnt  |  02  |++5B ID ++|\\
	typedef struct { 		
		UCHAR Opcode;		// 0x5B
		UCHAR Id;		// Id
	} Plc_cnt;						
This bytecode performs the specified arithmetic operation on the counter with the given value.++|  08-02-2024 Newly Added  |
|{5C}  Sce_shake_on  |  03  |++5C ?? ?? ++|\\
	typedef struct { 		
		UCHAR Opcode;		// 0x5C
		CHAR Slide_ofs;		// Slide_ofs
		CHAR Copy_ofs;		// Copy_ofs
	} Sce_shake_on;				
This bytecode turns on the specified shake effect with the given parameters.++|  08-02-2024 Newly Added  |
|{5D}  Mizu_div_set  |  02  |++5D ID ++|\\
	typedef struct { 		
		UCHAR Opcode;		// 0x5D
		UCHAR Id;		// Id
	} Mizu_div_set;
This bytecode sets the specified water division parameters.++|  08-02-2024 Newly Added  |
|{5E}  Keep_Item_ck  |  02  |++5E ??++|\\						
	typedef struct { 		
		UCHAR Opcode;		// 0x5E
		UCHAR ItemId;		// ID of the item to check
	} Keep_Item_ck;			
This bytecode checks the specified item parameters.++|  08-02-2024 Newly Added  |
|{5F}  Xa_vol  |  02  |++5F ??++|\\						
	typedef struct { 		
		UCHAR Opcode;		// 0x5F
		UCHAR Volume;		// XA volume level
	} Xa_vol;						
This bytecode sets the specified XA volume and pan parameters.++|  08-02-2024 Newly Added  |
|{60}  Kage_set  |  14  |++60 ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ++|\\
	typedef struct { 		
		UCHAR Opcode;		// 0x60
		UCHAR Work;		// Work
		CHAR Id;		// Id
		UCHAR Data0;		// Data0
		UCHAR Data1;		// Data1
		UCHAR Data2;		// Data2
		USHORT Data3;		// Data3
		USHORT Data4;		// Data4
		USHORT Data5;		// Data5
		USHORT Data6;		// Data6
	} Kage_set;							
This bytecode sets the specified shadow parameters.++|  08-02-2024 Newly Added  |
|{61}  Cut_be_set  |  04  |++61 ID ?? ?? ++|\\
	typedef struct { 		
		UCHAR Opcode;		// 0x61
		UCHAR Id;		// Id
		UCHAR Value;		// Value
		UCHAR OnOff;		// OnOff
	} Cut_be_set;					
This bytecode sets the specified cutscene parameters.++|  08-02-2024 Newly Added  |
|{62}  Sce_Item_lost  |  02  |++62 ID++|\\						
	typedef struct { 		
		UCHAR Opcode;		// 0x62
		UCHAR ItemId;		// ID of the lost item
	} Sce_Item_lost;						
This bytecode removes the specified item from the inventory.++|  08-02-2024 Newly Added  |
|{63}  Plc_gun_eff  |  01  |++63++|\\						
	typedef struct { 		
		UCHAR Opcode;		// 0x63
	} Plc_gun_eff;					
This bytecode sets the specified gun effect parameters.++|  08-02-2024 Newly Added  |
|{64}  Sce_espr_on2  |  16  |++64 ?? ?? ?? ?? ?? ?? XX XX YY YY ZZ ZZ ?? ?? ++|\\
	typedef struct { 		
		UCHAR Opcode;		// 0x64
		UCHAR dir_y_id2;	// dir_y_id2
		USHORT data1;		// data1
		UCHAR WorkKind;		// WorkKind
		UCHAR WorkNo;		// WorkNo
		USHORT data3;		// data3
		SHORT X;		// X
		SHORT Y;		// Y
		SHORT Z;		// Z
		USHORT DirY;		// DirY
	} Sce_espr_on2;				
This bytecode turns on the specified espr with the given parameters.++|  08-02-2024 Newly Added  |
|{65}  Sce_espr_kill2  |  02  |++65 ??++|\\						
	typedef struct { 		
		UCHAR Opcode;		// 0x65
		UCHAR EsprId;		// ID of the effect sprite to kill
	} Sce_espr_kill2;					
This bytecode kills the specified espr with the given parameters.++|  08-02-2024 Newly Added  |
|{66}  Plc_stop  |  01  |++66++|\\						
	typedef struct { 		
		UCHAR Opcode;		// 0x66
	} Plc_stop;							
This bytecode stops the specified plc function.++|  08-02-2024 Newly Added  |
|{67}  Aot_set_4p  |  28  |++67 ID ?? ?? ?? ?? ?? XX XX ZZ ZZ XX XX ZZ ZZ XX XX ZZ ZZ XX XX ZZ ZZ ?? ?? ?? ?? ++|\\
	typedef struct { 		
		UCHAR Opcode;		// 0x67
		UCHAR Aot;		// Aot
		UCHAR SCE;		// Id
		UCHAR SAT;		// Type
		UCHAR nFloor;		// nFloor
		UCHAR Super;		// Super
		SHORT X0;		// X0
		SHORT Z0;		// Z0
		SHORT X1;		// X1
		SHORT Z1;		// Z1
		SHORT X2;		// X2
		SHORT Z2;		// Z2
		SHORT X3;		// X3
		SHORT Z3;		// Z3
		USHORT Data0;		// Data0
		USHORT Data1;		// Data1
		USHORT Data2;		// Data2
	} Aot_set_4p;				
This bytecode sets the specified 4-point AOT parameters.++|  08-02-2024 Newly Added  |
|{68}  Door_aot_set_4p  |  40  |++68 ID ?? ?? ?? ?? ?? XX XX ZZ ZZ XX XX ZZ ZZ XX XX ZZ ZZ XX XX ZZ ZZ XX XX YY YY ZZ ZZ ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ++|\\
	typedef struct { 		
		UCHAR Opcode;		// 0x68
		UCHAR Aot;		// Aot
		UCHAR SCE;		// Id
		UCHAR SAT;		// Type
		UCHAR nFloor;		// nFloor
		UCHAR Super;		// Super
		SHORT X0;		// X0
		SHORT Z0;		// Z0
		SHORT X1;		// X1
		SHORT Z1;		// Z1
		SHORT X2;		// X2
		SHORT Z2;		// Z2
		SHORT X3;		// X3
		SHORT Z3;		// Z3
		SHORT Next_pos_x;	// Next_pos_x
		SHORT Next_pos_y;	// Next_pos_y
		SHORT Next_pos_z;	// Next_pos_z
		SHORT Next_cdir_y;	// Next_cdir_y
		UCHAR Next_stage;	// Next_stage
		UCHAR Next_room;	// Next_room
		UCHAR Next_cut;		// Next_cut
		UCHAR Next_nfloor;	// Next_nfloor
		UCHAR Dtex_type;	// Dtex_type
		UCHAR Door_type;	// Door_type
		UCHAR Knock_type;	// Knock_type
		UCHAR Key_id;		// Key_id
		UCHAR Key_type;		// Key_type
		UCHAR Free;		// Free
	} Door_aot_set_4p;					
This bytecode sets the specified 4-point door AOT parameters.++|  08-02-2024 Newly Added  |
|{69}  Item_aot_set_4p  |  30  |++69 ID ?? ?? ?? ?? ?? XX XX ZZ ZZ XX XX ZZ ZZ XX XX ZZ ZZ XX XX ZZ ZZ ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ++|\\
	typedef struct { 		
		UCHAR Opcode;		// 0x69
		UCHAR Aot;		// Aot
		UCHAR SCE;		// Id
		UCHAR SAT;		// Type
		UCHAR nFloor;		// nFloor
		UCHAR Super;		// Super
		SHORT X0;		// X0
		SHORT Z0;		// Z0
		SHORT X1;		// X1
		SHORT Z1;		// Z1
		SHORT X2;		// X2
		SHORT Z2;		// Z2
		SHORT X3;		// X3
		SHORT Z3;		// Z3
		USHORT iItem;		// iItem
		USHORT nItem;		// nItem
		USHORT Flag;		// Flag
		UCHAR MD1;		// MD1
		UCHAR Action;		// Action
	} Item_aot_set_4p;					
This bytecode sets the specified 4-point item AOT parameters.++|  08-02-2024 Newly Added  |
|{6A}  Light_pos_set  |  06  |++6A 00 ?? ?? XX XX ++|\\
	typedef struct { 		
		UCHAR Opcode;		// 0x6A
		UCHAR zAlign;		// zAlign
		UCHAR Index;		// Index
		UCHAR XYZ;		// XYZ
		SHORT Position;		// Position
	} Light_pos_set;					
This bytecode sets the specified light position parameters.++|  08-02-2024 Newly Added  |
|{6B}  Light_kido_set  |  04  |++6B ?? ?? XX XX ++|\\
	typedef struct { 		
		UCHAR Opcode;		// 0x6B
		UCHAR Index;		// Index
		SHORT Luminosity;	// Luminosity
	} Light_kido_set;					
This bytecode sets the specified light intensity and color parameters.++|  08-02-2024 Newly Added  |
|{6C}  Rbj_reset  |  01  |++6C++|\\						
	typedef struct { 		
		UCHAR Opcode;		// 0x6C
	} Rbj_reset;						
This bytecode resets the specified rbj parameters.++|  08-02-2024 Newly Added  |
|{6D}  Sce_scr_move  |  04  |++6D 00 XX XX ++|\\
	typedef struct { 		
		UCHAR Opcode;		// 0x6D
		UCHAR zAlign;		// zAlign
		SHORT Scrl_y;		// Scrl_y
	} Sce_scr_move;				
This bytecode moves the specified screen with the given parameters.++|  08-02-2024 Newly Added  |
|{6E}  Parts_set  |  06  |++6E 00 ?? ?? XX XX ++|\\
	typedef struct { 		
		UCHAR Opcode;		// 0x6E
		UCHAR zAlign;		// zAlign
		CHAR Id;		// Id
		CHAR Type;		// Type
		SHORT Value;		// Value
	} Parts_set;				
This bytecode sets the specified parts parameters.++|  08-02-2024 Newly Added  |
|{6F}  Movie_on  |  02  |++6F ??++|\\						
	typedef struct { 		
		UCHAR Opcode;		// 0x6F
		UCHAR MovieId;		// ID of the movie
	} Movie_on;						
This bytecode plays the specified movie.++|  08-02-2024 Newly Added  |
|{70}  Splc_ret  |  01  |++70++|\\						
	typedef struct { 		
		UCHAR Opcode;		// 0x70
	} Splc_ret;								
This bytecode returns from the specified splc function.++|  08-02-2024 Newly Added  |
|{71}  Splc_sce  |  01  |++71++|\\						
	typedef struct { 		
		UCHAR Opcode;		// 0x71
	} Splc_sce;						
This bytecode sets the specified splc parameters.++|  08-02-2024 Newly Added  |
|{72}  Super_on  |  16  |++72 00 ?? ?? ?? ?? XX XX XX XX XX XX XX XX XX ++|\\
	typedef struct { 		
		UCHAR Opcode;		// 0x72
		UCHAR zAlign;		// zAlign
		UCHAR data0;		// data0
		UCHAR data1;		// data1
		SHORT data2;		// data2
		SHORT data3;		// data3
		SHORT data4;		// data4
		SHORT data5;		// data5
		SHORT data6;		// data6
		SHORT data7;		// data7
	} Super_on;						
This bytecode turns on the specified super with the given parameters.++|  08-02-2024 Newly Added  |
|{73}  Mirror_set  |  08  |++73 ?? ?? XX XX XX XX XX XX ++|\\
	typedef struct { 		
		UCHAR Opcode;		// 0x73
		UCHAR Flag;		// Flag
		USHORT Position;	// Position
		USHORT Min;		// Min
		USHORT Max;		// Max
	} Mirror_set;		
This bytecode sets the specified mirror position parameters.++|  08-02-2024 Newly Added  |
|{74}  Sce_fade_adjust  |  04  |++74 ?? ?? XX XX ++|\\
	typedef struct { 		
		UCHAR Opcode;		// 0x74
		UCHAR data0;		// data0
		SHORT data1;		// data1
	} Sce_fade_adjust;					
This bytecode adjusts the specified fade parameters.++|  08-02-2024 Newly Added  |
|{75}  Sce_espr3d_on2  |  22  |++75 ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ++|\\
	typedef struct { 		
		UCHAR Opcode;		// 0x75
		UCHAR dir_y_id2;	// dir_y_id2
		USHORT bit;		// bit
		USHORT data4;		// data4
		USHORT data6;		// data6
		USHORT data8;		// data8
		USHORT dataA;		// dataA
		USHORT dataC;		// dataC
		USHORT dataE;		// dataE
		USHORT data10;		// data10
		USHORT data12;		// data12
		USHORT data14;		// data14
	} Sce_espr3d_on2;				
This bytecode turns on the specified 3D espr with the given parameters.++|  08-02-2024 Newly Added  |
|{76}  Sce_Item_get  |  03  |++76 ID ?? ++|\\
	typedef struct { 		
		UCHAR Opcode;		// 0x76
		UCHAR Id;		// Id
		UCHAR Num;		// Num
	} Sce_Item_get;				
This bytecode gets the specified item with the given quantity.++|  08-02-2024 Newly Added  |
|{77}  Sce_line_start  |  04  |++77 ID XX XX ++|\\
	typedef struct { 		
		UCHAR Opcode;		// 0x77
		UCHAR Id;		// Id
		USHORT Value;		// Value
	} Sce_line_start;						
This bytecode starts the specified line with the given parameters.++|  08-02-2024 Newly Added  |
|{78}  Sce_line_main  |  06  |++78 ID XX XX XX XX ++|\\
	typedef struct { 		
		UCHAR Opcode;		// 0x78
		UCHAR Id;		// Id
		SHORT Data0;		// Data0
		SHORT Data1;		// Data1
	} Sce_line_main;					
This bytecode sets the specified line parameters.++|  08-02-2024 Newly Added  |
|{79}  Sce_line_end  |  01  |++79 ++|\\
	typedef struct { 		
		UCHAR Opcode;		// 0x79
	} Sce_line_end;					
This bytecode ends the specified line.++|  08-02-2024 Newly Added  |
|{7A}  Sce_parts_bomb  |  16  |++7A 00 ?? ?? ?? ?? XX XX XX XX XX XX XX XX XX ++|\\
	typedef struct { 		
		UCHAR Opcode;		// 0x7A
		UCHAR zAlign;		// zAlign
		UCHAR data2;		// data2
		UCHAR data3;		// data3
		UCHAR data4;		// data4
		UCHAR data5;		// data5
		SHORT data6;		// data6
		SHORT data8;		// data8
		SHORT dataA;		// dataA
		SHORT dataC;		// dataC
		SHORT dataE;		// dataE
	} Sce_parts_bomb;					
This bytecode bombs the specified parts with the given parameters.++|  08-02-2024 Newly Added  |
|{7B}  Sce_parts_down  |  16  |++7B ID XX XX XX XX XX XX XX XX XX XX XX XX ++|\\
	typedef struct { 		
		UCHAR Opcode;		// 0x7B
		UCHAR Id;		// Id
		SHORT X;		// X
		SHORT Y;		// Y
		SHORT Z;		// Z
		SHORT cDirZ;		// cDirZ
		SHORT DirX;		// DirX
		SHORT DirY;		// DirY
		SHORT DirZ;		// DirZ
	} Sce_parts_down;					
This bytecode moves down the specified parts with the given parameters.++|  08-02-2024 Newly Added  |
|{7C}  Light_color_set  |  06  |++7C ?? ?? ?? ?? ?? 00 ++|\\
	typedef struct { 		
		UCHAR Opcode;		// 0x7C
		UCHAR Index;		// Index
		UCHAR R;		// R
		UCHAR G;		// G
		UCHAR B;		// B
		UCHAR zAlign;		// zAlign
	} Light_color_set;					
This bytecode sets the specified light color parameters.++|  08-02-2024 Newly Added  |
|{7D}  Light_pos_set2  |  06  |++7D ?? ?? ?? ?? XX XX ++|\\
	typedef struct { 		
		UCHAR Opcode;		// 0x7D
		UCHAR nCut;		// nCut
		UCHAR Index;		// Index
		UCHAR XYZ;		// XYZ
		SHORT Position;		// Position
	} Light_pos_set2;					
This bytecode sets the specified light position parameters.++|  08-02-2024 Newly Added  |
|{7E}  Light_kido_set2  |  06  |++7E 00 ?? ?? XX XX ++|\\
	typedef struct { 		
		UCHAR Opcode;		// 0x7E
		UCHAR zAlign;		// zAlign
		UCHAR nCut;		// nCut
		UCHAR Index;		// Index
		USHORT Luminosity;	// Luminosity
	} Light_kido_set2;					
This bytecode sets the specified light intensity and color parameters.++|  08-02-2024 Newly Added  |
|{7F}  Light_color_set2  |  06  |++7F ?? ?? ?? ?? ?? ?? ++|\\
	typedef struct { 		
		UCHAR Opcode;		// 0x7F
		UCHAR nCut;		// nCut
		UCHAR Index;		// Index
		UCHAR R;		// R
		UCHAR G;		// G
		UCHAR B;		// B
	} Light_color_set2;				
This bytecode sets the specified light color parameters.++|  08-02-2024 Newly Added  |
|{80}  Se_vol  |  02  |++80 ?? ??++|\\						
	typedef struct { 		
		UCHAR Opcode;		// 0x80
		UCHAR Volume;		// Volume level
	} Se_vol;					
This bytecode sets the specified sound effect volume and pan parameters.++|  08-02-2024 Newly Added  |
|{81}  Keep_Item_ck2  |  03  |++81 ID ??++|\\						
	typedef struct { 		
		UCHAR Opcode;		// 0x81
		UCHAR ItemId;		// ID of the item to check
		UCHAR Quantity;		// Quantity of the item to check
	} Keep_Item_ck2;						
This bytecode checks the specified item parameters.++|  08-02-2024 Newly Added  |
|{82}  Sce_espr_task  |  03  |++82 ?? ?? ??++|\\
	typedef struct { 		
		UCHAR Opcode;		// 0x82
		CHAR WorkKind;		// WorkKind
		CHAR WorkNo;		// WorkNo
	} Sce_espr_task;					
This bytecode sets the specified espr task parameters.++|  08-02-2024 Newly Added  |
|{83}  Plc_heal  |  01  |++83++|\\						
	typedef struct { 		
		UCHAR Opcode;		// 0x83
	} Plc_heal;							
This bytecode heals the specified plc function.++|  08-02-2024 Newly Added  |
|{84}  St_map_hint  |  02  |++84 ?? ??++|\\
	typedef struct { 		
		UCHAR Opcode;		// 0x84
		UCHAR DrModeTag;	// DrModeTag
	} St_map_hint;		
This bytecode sets the specified map hint parameters.++|  08-02-2024 Newly Added  |
|{85}  Sce_em_pos_ck  |  06  |++85 ?? ?? ?? ?? CO NT++|\\
	typedef struct { 		
		UCHAR Opcode;		// 0x85
		UCHAR Id;		// Id
		UCHAR data1;		// data1
		UCHAR Att;		// Att
		USHORT Flg;		// Flg
	} Sce_em_pos_ck;				
This bytecode checks the specified enemy position parameters.++|  08-02-2024 Newly Added  |
|{86}  Poison_ck  |  01  |++86++|\\						
	typedef struct { 		
		UCHAR Opcode;		// 0x86
	} Poison_ck;					
This bytecode checks the specified poison parameters.++|  08-02-2024 Newly Added  |
|{87}  Poison_clr  |  01  |++87++|\\						
	typedef struct { 		
		UCHAR Opcode;		// 0x87
	} Poison_clr;				
This bytecode clears the specified poison parameters.++|  08-02-2024 Newly Added  |
|{88}  Sce_Item_lost2  |  03  |++88 ID ??++|\\						
	typedef struct { 		
		UCHAR Opcode;		// 0x88
		UCHAR ItemId;		// ID of the item
		UCHAR Quantity;		// Quantity of the item
	} Sce_Item_lost2;					
This bytecode removes the specified item from the inventory.++|  08-02-2024 Newly Added  |
|{89}  Evt_next2  |  01  |++89++|\\						
	typedef struct { 		
		UCHAR Opcode;		// 0x89
	} Evt_next2;					
This bytecode moves to the next event in the sequence.++|  08-02-2024 Newly Added  |
|{8A}  Vib_set0  |  06  |++8A 00 ?? ?? ?? ??++|\\
	typedef struct { 		
		UCHAR Opcode;		// 0x8A
		UCHAR zAlign;		// zAlign
		USHORT data0;		// data0
		USHORT data1;		// data1
	} Vib_set0;				
This bytecode sets the specified vibration parameters.++|  08-02-2024 Newly Added  |
|{8B}  Vib_set1  |  06  |++8B ID  VA LU VA LU++|\\						
	typedef struct { 		
		UCHAR Opcode;		// 0x8B
		UCHAR Id;		// Vibration ID
		USHORT Value1;		// Vibration Value 1
		USHORT Value2;		// Vibration Value 2
	} Vib_set1;					
This bytecode sets the specified vibration parameters.++|  08-02-2024 Newly Added  |
|{8C}  Vib_fade_set  |  08  |++8C 00 ?? ?? ?? ?? ?? ??++|\\
	typedef struct { 		
		UCHAR Opcode;		// 0x8C
		UCHAR zAlign;		// zAlign
		UCHAR data0;		// data0
		UCHAR data1;		// data1
		USHORT data2;		// data2
		USHORT data3;		// data3
	} Vib_fade_set;		
This bytecode sets the specified vibration fade parameters.++|  08-02-2024 Newly Added  |
|{8D}  Item_aot_set2  |  24  |++8D ID ?? ?? ?? ?? ?? XX XX ZZ ZZ WW WW DD DD ?? ?? ?? ?? ?? ?? ?? ?? ??++|\\						
	typedef struct { 		
		UCHAR Opcode;		// 0x8D
		UCHAR Aot;		// Id
		UCHAR SCE;		// Type (0x02)
		UCHAR SAT;		// Atari
		UCHAR nFloor;		// Height
		UCHAR Super;		// Matrix
		SHORT X;		// Position
		SHORT Z;		// Position
		USHORT W;		// Size
		USHORT D;		// Size
		USHORT iItem;		// Item Id
		USHORT nItem;		// Item Amount
		USHORT Flag;		// argv[1] for Flg_on() and Flg_ck()
		UCHAR MD1;		// MD1 File Id - 0xFF if no MD1
		UCHAR Action;		// Predefined action taken to obtain
		UCHAR data16;		// 
		UCHAR data17;		// 
	} Item_aot_set2;
This bytecode sets the specified item AOT parameters.++|  08-02-2024 Newly Added  |
|{8E}  Sce_em_set2  |  24  |++8E 00 ID ?? ?? SI ZE ?? ?? ?? XX XX YY YY ZZ ZZ DY DY ?? ?? ?? ??++|\\						
	typedef struct { 		
		UCHAR Opcode;		// 0x8E
		UCHAR zAlign;		// Alignment byte, always zero
		UCHAR Aot;		// 
		UCHAR EMD;		// 
		USHORT Type;		// 
		UCHAR nFloor;		// 
		UCHAR SeType;		// 
		UCHAR ModelType;	// 
		UCHAR EmSetFlg;		// 
		SHORT X;		// 
		SHORT Y;		// 
		SHORT Z;		// 
		SHORT DirY;		// 
		USHORT Timer0;		// 
		USHORT Timer1;		// 
		USHORT data16;		// 
	} Sce_em_set2;				
This bytecode sets the specified enemy parameters.++|  08-02-2024 Newly Added  |